technical data sheet 1 / 3 right angle plug solder type r223.162.000 cable .085 series : mmbx issue : 0736 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. all dimensions are in mm. . . pn ao components body center contact outer contact insulator gasket others parts - - materials brass beryllium copper beryllium copper ptfe brass - - plating ( m m) npgr npgr npgr npgr - -
technical data sheet 2 / 3 right angle plug solder type r223.162.000 cable .085 series : mmbx issue : 0736 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. packaging standard unit other 100 w option contact us electrical characteristics impedance 50 w frequency 0 - 12.4 ghz vswr 1.20 + 0,0000 x f(ghz) maxi insertion loss 0.05 ? f(ghz) db maxi rf leakage - ( 100 - f(ghz)) db maxi voltage rating 250 veff maxi dielectric withstanding voltage 750 veff mini insulation resistance 1000 m w mini mechanical characteristics center contact retention axial force C mating end 10 n mini axial force C opposite end 10 n mini torque na n.cm mini recommended torque mating na n.cm panel nut na n.cm clamp nut na n.cm a/f clamp nut 0,0000 mm mating life 100 cycles mini weight 0,8290 g environmental operating temperature - 55/+155 c hermetic seal na atm.cm3/s panel leakage na specification cable assembly stripping a b c d e f mm 2,60 1,40 0,00 0,00 0,00 0,00 assembly instruction : recommended cable(s) rg 405 - characteristics indicated on this data sheet are th ose that can be achieved with the highest performance cable. intrin sic limitations of the cable may diminish the performance of the assem bly cable retention - pull off 136 n mini - torque na n.cm tooling part number description hexagon . . . r282.868.000 extraction assembly tool other characteristics to 6 ghz interface mmbx only up to 2.5ghz
technical data sheet 3 / 3 right angle plug solder type r223.162.000 cable .085 series : mmbx issue : 0736 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. we recommend a thermal preconditionning cable. strip the cable. to tin cable inner conductor. press fit the cap. components 1 2 to push the cable into the connector body until contact with it. to solder the cable on the connector body. to solder cable inner conductor into the centre contact. to clean soldering area. 4 3 body cap slide mounting tool r282 868 onto the body grooves. press fit the cap turning tool handle with adapted wrench 7mm (cap in the same face ). stripping dimensions cap solder solder hex 7/flats
|
